Description
It is a product for removing most paint stains and marks made by graffiti on several kinds of surfaces: masonry and stone walls, glass objects, metal, urban furniture, some plastics and other materials.
Technical Data
- Product Type: Thixotropic organic solvents
- Coverage (UNE 48282) 400 ml can: 0.6 - 1 m2, depending on the use and treated surface.
- Pack sizes: 400 m
Directions for use
GENERAL REMARKS:
Shake the spray can for 1 minute while hearing the mixing balls. The surfaces have to be clean, dry and sound.
Firstly, carefully evaluate the kind of surface to be cleaned. Before application test the resistance of the surface to the cleaning procedure, especially with some plastics and certain paints.
Protect the surfaces that are not to be cleaned. Perform a spray test on a non-visible area. The Graffiti Remover can alter the original appearance of some plastic or painted surfaces.
Apply a thick coat and let the product to act for 10 - 15 minutes. Depending on the kind or the thickness of the graffiti to be removed, it may be necessary to let the product to act for several hours.
Before applying new coatings on the surface, remove all residues of Graffiti Remover with water and a scourer or with cleaning solvent.
- On non-porous surfaces, such as glass, metal, tile and vitrified elements, some marbles, two-component paints, follow this:procedure: Spray at a distance of 20 -25 cm. Remove by carefully rubbing with a brush and rinse with plenty of water.
- On porous surfaces. For instance in brick and masonry walls, some stones, marble, bare wood, textured walls etc. It is necessary to follow the previous procedure, but finishing with water jet so that the Graffiti Remover can easily reach the pores and irregularities of the surface.