ANTIGOTER COVERS Anti-skid, weatherproof, UV and ozone resistant. TO P

Alp Pinturas


Elastic coating for roof waterproofing. Waterproof, passable, reinforced with fiber, elastic and adaptable to all forms of surfaces.

More details


tax incl.

44,66€ tax incl.


More info

Main Properties

  • Waterproof to rainwater.
  • Suitable for pedestrian traffic.
  • Reinforced with fibers.
  • Elastic, even at sudden changes in temperature.
  • Adaptability to all surface shapes.
  • Good adhesion on the usual surfaces of the construction.
  • Unalterable to the alkalis of the cement (unsaponifiable).
  • Easy application.
  • No tar, asphalt or plasticizers.
  • Resistant to weathering, UV and ozone.

Recommended Uses
Waterproofing of roofs of different nature: ceramic tiles, concrete, cement mortar, fiber cement, etc ...
Renovation and protection of old asphaltic waterproofing, as well as metal roofing of galvanized sheet or of aluminum.

Surface treatment

It is necessary that the surface has a minimum slope to guarantee drainage and allow the free evacuation of water. The surface to be treated must be completely dry. Do not apply in the presence of fog, risk of rain or frost. It should not be applied in full sun or strong wind. It is necessary to examine the condition of the substrate, if it is necessary to fill cracks larger than 2mm, we recommend using fiberglass mesh resistant to alkalinity. Depending on the state of the support and when it is considered necessary to equalize absorptions, we recommend the application of a hand of acrylic fixative, diluted to 25% in water, (1 part Fixer and 3 water).

  • New surfaces must be free of dust, clean, dry and free of efflorescence.
  • Old surfaces, in addition to the above considerations should be removed the remains of poorly adhered paint.

Appearance: Semi-gloss depending on the number of hands and the absorption of the surface

Recommended Performance: 1-1.5 m² / l

Number of layers: The best application requires 2 to 3 hands. The minimum thickness of the applied product should be 1.5 mm and the consumption greater than 2 L / m2.
Tools: Brush / Roller / Airless.
Dilution: With water when necessary.
Cleaning: Clean utensils with water immediately after use.

Drying: 3-6 h at 20ºC with thickness of 1mm. (In other conditions it can be extended up to 9h).
Repainting: After 24 hours.