• -30%
    BARNIZ AL AGUA PARQUET Y ESCALERAS

WATER VARNISH PARQUET AND BRIGHT STAIRS Resins Polyurethane, Appearance and Tact Natural wood

€31.47
€22.03 Save 30%
Tax included

Water-based varnish with acrylic-urethane resins that provides excellent abrasion, impact, water and stain resistance. Appearance and touch of natural wood, great transparency and quick drying.

size : 750ml.
Color : COLORFUL PROTECTOR
Quantity
Add to wishlist

Main Properties

  • Resistant to abrasion.
  • With polyurethane and waxes.
  • Repeat the water. Waterproof.


Applications

Inside. For the varnishing of wood or cork floors, stairs, bar bars and where high abrasion resistance is required indoors


PREPARING THE SUPPORT

The wood should be free of waxes, clean and dry (with less than 15% moisture).

  • New woods: Sand the wood in the direction of the grain with fine grit sandpaper and clean. We recommend sealing the pore with Tapaporos to the water.
  • Varnished woods: In good condition, sand and remove the resulting dust. Pre-check the compatibility of this product with the old varnish. In a bad condition, remove traces of previous varnish stabbing the surface.
  • Resin or tropical woods and other surfaces, consult technical service.



HOW TO USE

Remove the product with a spatula. Product ready for use. Apply two to three layers to the desired finish, sanding between layers once dry and eliminating the resulting dust. No more than 24 hours between layer and layer. Put into service in 48h.


CERTIFICATES:

  • Certification Euroclasses of reaction to the fire in category C s3 d0. Products that comply with Euroclases regulations have a good fire resistance.
  • Certification No Toxicity (UNE-EN 71-3): Certifies that the paint contains no toxic substances.



Yield: 10-14 m² / Lt (approximate and according to stand).

Drying: (according to color, applied thickness and ambient temperature)

  • Total: 1 hours.
  • Repainting: 4 hours.


Number of layers: 2 or 3 layers depending on the porosity of the support and the application

Application tools: Brush, gun, roller.

Dilution:

  • Product ready for use.
  • For spray gun must be diluted maximum 15% with water to achieve the proper viscosity.


Cleaning: Water.

New

You might also like

HVL SPRAY GUN AIR -PROFESSIONAL

€59.88 €41.92 -30%

Airbrush diy for any finish.

  • Includes adjustable fluid, pattern and air controls.
  • Designed to provide equal atomization and particle size for all kinds of surface painting
  • Stainless steel needle and nozzle accommodate a variety of coatings
  • Precise air cap set
  • Light weight, ergonomic edsign and easy trigger pivot reduce operating fatigue

16 other products in the same category:

Polyurethane varnish matt  for wood. High elasticity. High wear and wash resistanceVery hard and flexible. Long lasting and high resistance to wear.

For the decoration and protection of all kinds of natural or stained wood structures

  • Indoors: furniture, doors, panelling, etc.
  • Outdoors: surfaces protected from direct exposure to the weather: balconies ceilings, pergolas, canopies, etc.

One-component polyurethane varnish. Reinforced formula. Easy application. Long lasting, great hardness and resistance. Based on a high solid technology. Quick-drying. Exceptional transparency that does not alter the tones and contrasts of the wood graining. High elasticity. High wear and wash resistance. Satin finish (polished wax).  Very low odour. 

Varnish marine and high quality based on alkyd resins modified with urethanes. Resistant to the wood expanding and contracting. Finish with balanced hardness and elasticity and elastic. Resistant to the outdoors

Suitable for protection and decoracion de of surfaces on boats, wooden buildings near the sea, indoors and outdoors.

Varnish formulated with alkyd resins and ultraviolet filters that provide a high elasticity and resistance to environmental conditions of high humidity, thermal shock, the effects of the sun and wear. Great brightness retention Foreign Suitable for carpentry and outdoor furniture in high mountain areas

Varnish formulated with alkyd resins and ultraviolet filters that provide a high elasticity and resistance to environmental conditions of high humidity, thermal shock, the effects of the sun and wear. Great brightness retention Foreign Suitable for carpentry and outdoor furniture in high mountain areas

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.