Main Properties

• Excellent waterproof protector.
• Breathable with water vapor.
• It penetrates into the holder and protects it without forming film.
• Good adhesion on the usual surfaces of the construction.
• Unalterable to the alkalis of the cement (unsaponifiable).
• Resistant to weathering, UV and ozone.
• Contains anti-mold preservative.
  

Recommended Uses

Especially indicated as preventive treatment against saltpetre in the porous materials commonly used in construction such as brick, mortar, concrete, plaster, etc ... both indoors and outdoors.

Surface treatment

• New surfaces must be free of dust, clean, dry and free of efflorescence.
• Old surfaces, in addition to the above considerations should be removed paint scraps. Not applicable on surfaces already painted or waterproof coatings.
  

Remarks: Paint should be performed before the product completely reacts and exert all the water repellent. Once reacted, it will only be repaintable with solvent based products. Each support is different, so it is recommended to make a small application in a little visible area, to ensure that there are no strange reactions or incompatibilities between the product and the stand. It is recommended to repeat the treatment at 2-3 years.

Yield: 2-6 m² / l
Drying: 3-4 hours.
Repainting: Between 8-24 hours. (Before the total reaction of the product).

Number of layers: A single hand forcing the product to penetrate the support and removing the surplus material. On very absorbent substrates another hand can be applied, always before the first one dries.

Tools: Brush / Roller.

Dilution: Ready to use.

Cleaning: Clean utensils with water immediately after use.