• -25%
    SPRAY ANTI STAIN WHITE. BLOCK AND INHIBIT ANY TYPE OF SPOT. REINFORCING. DO NOT YELLOW WITH TIME

STAIN BLOCK SPRAY. BLOCK AND INHIBIT ANY TYPE OF SPOT. REINFORCING. DO NOT YELLOW WITH TIME

€25.11
€18.83 Save 25%
Tax included

Enamel acrylic solvent to the matt smooth, very fast drying and high coverage, to cover hard spots easily and durably. For walls and ceilings

size : 500ml.
Color : White
Quantity
Add to wishlist

DESCRIPTION

Enamel acrylic solvent to the matt smooth, very fast drying and high coverage, to cover hard spots easily and durably.

Main Properties

  • Excellent flexibility and adhesion.
  • Ease of application and repainting.
  • Good hardening.
  • Good power coverage.
  • Durability of brightness and color.
  • Does not yellow.

Recommended Uses

In interior and exterior as a background layer and as finish over other paints, when you want to block difficult spots.

Dry to the touch: 5 min

Total drying: 10 min

Dry Layer Thickness: 20 μm / layer (2 passes)

Theoretical performance: 2.4 m² for aerosol 400 m

Product life:> 2 years

Repainting: After 5 mi

Application Instructions

  • Shake the spray well before use, approximately one minute after hearing the mixer noise.
  • Apply on clean and dry surfaces. Remove corrosion with a wire brush. Plastics such as PS and PP apply an anchor layer.
  • Apply in thin layers to obtain better results, it is better three thin layers than one thick, repaintable at thirty minutes with the same paint.
  • Do not apply over connected equipment and use in well ventilated areas
New

You might also like

INDOOR AND OUTDOOR SATIN...
  • On sale!
  • -25%

Indoor and outdoor satin emulsion paint. Permanent white. High covering. Waterproof, breathable and wash resistant. Good resistance to weathering and alkalis. It contains anti mould preservative. Non-yellowing.

Especially suitable to protect and decorate surfaces, where a high level of  resistance to dirt and washes is required.

Electrostatic plastic roll with bodybuilder's tape, for the protection of baseboards, glass, walls, ceilings, etc. Manufactured in bioriented polyethylene, it is suitable for bodywork and allows light to pass through. Easy to cut and remove, leaves no adhesive residue. Length: 20 meters.

16 other products in the same category:

SPRAY FULL DIP VINILICO
  • On sale!
  • -30%

FULL DIP MATTE FINISH

€11.07 €7.75 -30%

Full Dip Matte finish.

The basic and most popular colors of Dip Full in matte finishes.

Completely free including two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for paint or greater contribution of large areas.Wrap, protects and changes color with matte finish. It can be removed by pulling it, as if it were a conventional vinyl.

FULL DIP MATTE FINISH
  • On sale!
  • -30%

FULL DIP MATTE FINISH

€12.40 €8.68 -30%

Full Dip Matte finish.

The basic and most popular colors of Dip Full in matte finishes.

Completely free including two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for paint or greater contribution of large areas.Wrap, protects and changes color with matte finish. It can be removed by pulling it, as if it were a conventional vinyl.

FULL DIP MATTE FINISH
  • On sale!
  • -25%

FULL DIP MATTE FINISH

€12.40 €9.30 -25%

Full Dip Matte finish.

The basic and most popular colors of Dip Full in matte finishes.

Completely free including two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for paint or greater contribution of large areas.Wrap, protects and changes color with matte finish. It can be removed by pulling it, as if it were a conventional vinyl.

High quality glossy one-component acrylic varnish specially designed for the automotive sector. Excellent resistance in exterior and interior, does not yellow and helps to protect from UV rays to color support. It can be applied on interior, exterior, rims, mirrors, motorcycles, etc. that have previously been painted with DyG Full Dip Colors Refinish

Monocomponent acrylic lacquer Very high quality MATE FINISH specially designed for the automotive industry.and can apply to interior, exterior, rims, mirrors, motorcycles, etc.Endurece in 3 hours, anti-scratch technology. Self-leveling, smooth and smooth finish. It can be sanded and polished. High elasticity for long periods of time

SPRAY FULL DIP VINILICO
  • On sale!
  • -30%

FULL DIP MATTE FINISH

€11.07 €7.75 -30%

Full Dip Matte finish.

The basic and most popular colors of Dip Full in matte finishes.

Completely free including two nozzles, each designed for a function: standard nozzle flow and high-flow nozzle for paint or greater contribution of large areas.Wrap, protects and changes color with matte finish. It can be removed by pulling it, as if it were a conventional vinyl.

The Preval Sprayer is an aerosol-based spray system that allows the user to mix up any paint, chemical or solution and turn it in to sprayable material through Preval’s patented Venturi Vacuum Process. This process draws the medium from the attached reservoir and delivers a professional-grade finish on virtually any surface without mixing the propellant and medium together

FULL DIP MATTE FINISH
  • On sale!
  • -30%

Full Dip Smoked in Yellow.

Aerosol version of 400ml specially formulated to smoke headlights, or any other surface.

It allows the passage of light up to a thickness of 120 microns, providing a characteristic smoky effect. Depending on the thickness obtained different smoked tones will be obtained

This store uses cookies to ensure a better user experience. By continuing to use this site, you accept our cookie policy.