PLASTER PLASTER. Filling of holes in interiors. Subjection of materials. It is commonly used in the fastening of boxes and electrical or plumbing materials. For indoor use. Plasterboard repairs.
FIELDS OF APPLICATION
PROPERTIES
APPLICATION AND PREPARATION OF THE SUPPORT
The supports must be healthy, dry and free of dust, grease and wax. Remove dust and clean the surface to be treated. If the bottom is very absorbent or disintegrable, apply a primer as TOLLENS WATER FIXING PRIMER. On polished surfaces, sand to open the pore.
Isolate and protect the metal parts with ALL TERRAIN or other anticorrosive primer. Moisten the support before applying the product.
Add half a liter of water per kg. of gypsum preparation and mix until you get a consistent paste. Do not knead once the setting has begun.
Apply with a trowel or spatula in the filling of holes and with a trowel in the laying. Clean tools with water immediately after use.
Clean the tool with water, immediately after use.
Mixture: 0.5l of water per 1 kg of powder
Tool: Trowel, spatula or trowel
Cleaning Tool: With water, immediately after using
Working time: Approx. 8 minutes at 20 ° C
Setting time: 20 minutes at 20ºC. The total setting is made after 30 days.
Rest time 3 minutes
Drying time: Variables according to thickness and climatic conditions
Performance: Approx. 1.6 kg. per mm thickness
Water-based acrylic filler (acrylic polymers). To be used indoors and outdoors. Its high flexibility absorbs alterations in the wood shape and size up to 20% caused by temperature changes. Because of its high glassfibre content, it has very good mechanical properties. High adhesion. It avoids breakage produced by structural changes
Transparent polyethylene cover sheet. Basic cover 6 micron gauge. Folded foil pouch 4m x 5m. Use: suitable for protection of all types of materials, from dust, dirt, etc ... Covering furniture in paint job.Protege moisture, dirt and shock.
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
Seals and fixes cracks and high movement joints Mid-modulus range polyurethane putty with capacity for both sealing cracks and high-movement joints and for fixing all kinds of materials
High performance cement based adhesive. Applicable on supports made with brick, cement, stone, concrete and fiber-cement. Specially designed to glued tiles on masonry surfaces.
Flexible putty in aqueous base reinforced with glass fibre for the filling of dynamic or structural cracks. Has permanent elasticity and excellent resistance to ageing. Indoor-Outdoor. For filling and sealing microcracks, cracks and structural fissures. For sealing joints and as a substitute for glass fiber tapes.
Repair and seal joints and cracks Acrylic putty especially suitable for sealing cracks and small holes as well as for sealing joints with movement.. Can be painted with any type of paint
FAST CEMENT .. Special product for sealing water leaks, repair and sewage joints and emergency work.
Some of its properties:
To repair joints and chipped tiles and tiles. Reconstruction of edges and access of swimming pools. Repair anchors stairs or fasten, floors and walls, stoneware. Waterproofing.
PREPARED OF ESCAYOLA FOR MOLDINGS. Molding and repair in plaster Moldings, rosettes, soffits and false ceilings. Useful and economic- Filling of cracks and holes. Crafts. INSIDE
Very fine finish and great ease of sanding
Plaste powder white of last generation for indoor polyvalent jobs, where you need to save time, superior performance and a guaranteed result.
Applicable on any interior support, both absorbent (plaster, plasterboard, cement, concrete, wood, stone, etc.) as difficult or non-absorbent funds (old painted walls, gotele, tile, tile, glass, etc.
Filling of ceramic joints, terraces and floor tiles. Repair in swimming pools. Specially designed to fill and waterproof joints in floors and walls, ceramics with absorption capacity ≤ 3%, porcelain stoneware, vitreous mosaic, with natural stone platelets. Indicated to work in humid places like bathrooms, kitchens or swimming pools, in occasional or permanent contact with wate
T-Rex Gold Power is a one-component, elastic, neutral and high-quality adhesive sealer based on SMX polymer with an extremely high initial adhesion of at least 400 kg / m².
Cement based hydraulic blender for indoor-outdoor uses. Repairs in wet areas (bathrooms, kitchens...). Fixing sanitation facilities and plumbing. Joints between walls and floors. Flooring and flooring base. Repairs on concrete, brick and stone (never on plaster). Mixed with sand can be used for masonry work. Smooth finish. No removal. White colour
Imprimacion alto espesor para carrocerias,
Chat with us on WhatsApp
Español
Français
