SPECIAL CLAY TILE, TUMBLED MARBLE, TRAVERTINE, SLATE, STONE, HYDRAULIC MOSAIC BRICK AND SIDE VIEW - EASY APPLICATION AND WITHOUT COMPLICATIONS OF FUND AND FINISH - DRYING 2 to 4 hours - READY TO USE - APPLICATION TO BRUSH OR ROLLER FOAM FINE.

PROPERTIES: once applied gives a shade of ecru its naturally occurring lasts forever, does not stain with food spills, oils, drinks, mud, grease and other debris. Hydrophobic surface repelling water. It is resistant to crushing, abrasion, washing and all kinds of uses, not flake and pavements need not carry built-post waxes maintenance.

Maximum resistance inside for strength outside use MORAKRON WEATHER

Mulberry exclusive formulation varnishes waxes incorporated into the same oil at high temperature so waxing is not necessary, by itself is covered, waxing, with a soft touch and a wonderful satin finish, and excellent hardness footsteps without footprints mark without maintenance.

INSTRUCTIONS FOR USE:

let dry before applying the work 30 days in summer and 60 in winter minimum. If tile adhesive will suffice 4 or 5 days, with our MORAFOND CLEANING Clean.

After cleaning with Morafond remover or cement and water rinse, let dry 15 days in summer and 30 in winter before application.

shake the container and apply one coat of gloss 1st rustic and end-mate (3 -. 4 layers approx) if you want to leave a perfect satin finish waxed, to finish 3-4 days rub with a rough cloth, sackcloth, similar or polishing machine (dry).

It is applied by brush or fine foam roller. Tack of 2-4 hours (depending on ambient temperature).

Once treated the floor with our products are maintenance of waxed later and the like because they are built on the same products and how clean is like a tile either with water and detergent.

Remember to be careful with the "homemade formulas" because they can cause serious problems in the pavement of mud and intractable.

Pavements much absorption: (Manuals) shake the container and apply one coat of gloss 1st-rustic abundant and well distributed brush and let dry for 24 hours, apply a coat of matte every 24 hours until well covered (approx. 3 - 4 layers, according pavement) total return approx. 1 liter 3 M2.

Pavements little absorption (smooth), aged marble, stone, slate: shake the bottle and apply only the 1st layer brightness-rustic and well laid out, apply a 2nd layer of matte to be well covered every 24 hours (depending on absorption) once is covered not apply more layers

Hydraulic Mosaic: Apply the widespread layers and especially the last finishing to widespread wrist or sponge. Total yield approx. 7-10 1-liter M2.

Stoneware pavements untyped absorption, porcelain, rasilla, etc .: NOT RECOMMEND

It will highlight your touch tone satin waxed if you want a brighter gloss can add 20 to 30% brightness.

Important: Before applying avoid soil moisture and dirt, after 2 days you can tread carefully at 6 regular days and 20 days every use. Allow to dry with good ventilation.

No need maintenance products, over the years and found deterioration can apply another coat without stripping.

Where other products were applied to etch open unknown.

RESTORATION AND MAINTENANCE:

Over the years if there has been damage or wear much use, stripping is not necessary, only clean with water and detergent to remove grease and dirt. Outside cleaned with metal brushes or steel esparto slightly and sweeping. A 1st layer and 24 hours later a 2nd applied until well covered. On surfaces that other products should be applied stripping.

If misapplication not meet our application forms shirk any guarantee.

Total Yield: 1 liter for 3 m2. manuals on mud floors, 5 m2 in mechanical mud floors 7-10 m2 aged marble slate etc ...

Useful Cleaning turpentine or white spirit

Package Type: 1, 4, 10, 20, 220 and 1,000 liters

STANDARDS: UNE 23727-90 Reaction to fire M-1 to M-0 (non-flammable) support

The information provided in this sheet is the result of our laboratory research and practical experience of application. However and because often the products are used in conditions beyond our control, we can not guarantee anything but the success of the product as long as their application and use are correct.