Español
Français
- -20%
Wooden sheet of 230 x 280 mm dry wood. Excellent Price-quality
- Finish: Uniform
- Support: Paper B
- Abrasive: Aluminum Oxide
Wire Brush - medium abrasive for stripping, recommended for metals
€4.50
€3.60
Save 20%
Tax included
Wire Brush, medium abrasive for stripping, recommended for metals. Suitable to remove rust, paint and adhesions in general. Recommended for small surfaces.
- Suitable to remove rust, paint and adhesions in general.
Recommended use: Medium abrasive for stripping, recommended for metals
You might also like
Discs for dry sanding on woods, varnishes and lacquers and in the repair of bodies of diameter 150 mm with 6 + 1 holes. Grains 40 to 2000.
Doble Thickness Flat Brush, for all kind of paints. Wooden handle and pure bristle.
- Wooden handle.
- Pure bristle.
Recommended use: For all kind of paints
Professional Sanding Block, to poolish wood, paint... Semi flexible foam inside and can be used both wet and dry.
- Semi flexible foam inside.
- Medium density foam covered with aluminum oxide
Recommended use: To polish wood, metal plastic, walls...
Flat Sanding Block for wood and bodywork. Very flexible foam inside and adaptable to the surface.
- Very flexible foam inside.
- Can be used wet or dry.
- Adaptable to the surface.
- Medium density foam covered with silicon carbide
Recommended use: For wood and bodywork
16 other products in the same category:
Lambskin Glove, for decorative products and waxes. To apply waxes on stucco without scratching and to apply several decorative products based on particles.
- To apply waxes on stucco without scratching.
- To apply several decorative products based on particles.
Recommended use: For decorative products and waxes
Universal tinting colours for paints. High concentration and compatibility. To tint synthetic and greasy paints and varnishes, as well as coatings made out of chlorinated rubber... It is also suitable for water-emulsion, size and distemper paints. Moreover, it can tint non-structural concrete.
Rectangular Rubber Block, for wood imitation. First apply paint with a brush. In wet paint, use this product to create the wood veins.
- First apply paint with a brush.
- In wet paint, use this product to create the wood veins.
- Rubber
Very volatile thinner for oil colours, varnishes and driers. It evaporates without leaving any residue.
Ideal to apply first coats (thin). It enhances the application of oil colours and stimulates their drying, without leaving any residue.
Orange pressed sponge to apply decoration finishes.
The Scratch Comb is used for striped and veined decorative effects. Made of wood and steel with a rounded pick.
- Rounded pick
- Wood and steel
Vegetable oil to be mixed with oil colours, especially cold or light shades.
It does not alter the shades of oil colours. Ideal to be mixed with white colours, pastel colours and colours which are to remain fast and avoiding yellowing.
Used in too large amounts or by too thick coats, it can produce wrinkling and some yellowing in light colours.
Chat with us on WhatsApp
