Water paint whose special formula allows a chalk effect finish on the interior furniture with a very easy sanding
Warning: Last items in stock!
Water paint whose special formula allows a chalk effect finish on the interior furniture with a very easy sanding.
Water paint with very weak odor, very easy to apply and very easy to sand, allowing to obtain the high chalk effect decoration.
For decoration and interior work on any properly prepared surface (wood, plaster, cement, brick, stone, etc.) where this decorative finish is desired
Surfaces must be clean, dry and conveniently prepared before applying Blatem Chalk Paint.
If the surface is painted with tempera lime or remove it previously and if painted with quality paint, remove parts that are in poor condition.
HOW TO USE
Blatem Chalk Paint is applied to brush, roller or airbrush with low dilution: brush or roller 5-10%, spray gun 15-20% of drinking water. Since Blatem Chalk Paint is easily sanded, we can first apply a base color and then a second one with another color that contrasts with the one below.
Depending on the areas and intensities of the sanding, we will get the type of finish.
It is important that the paint is completely dry before sanding.
If we want a finish to the wax, we will apply on Blatem Chalk Paint by brush, cotton cloth or sponge, offering a handmade aspect.
To get an aged look we will apply our Dark Chalk Paint Finish Wax. To finish, we will polish with a cloth until obtaining the desired brightness.
If the painted surface is going to have a lot of use, apply a coat of Mate Paint Chalk Paint for extra protection. If the piece of furniture is lacquered, it is recommended to be previously stripped or sealed with our White Synthetic Sealer, prior to the application of the Chalk Paint System.
Repainting: 4-6 hours.
Yield: 8-11 m2 / lt and hand.
Drying: 30 to 60 minutes.
Utensils: Cleaning with water.
Conservation: More than one year in original closed container.