PINTUDECOR MONOLAYER IS A MATTE ACRYLIC PAINT FOR DECORATING WALLS AND CEILINGS, INSIDE AND OUTSIDE

Gilmapin Pinturas

New

Pintudecor Monolayer is a matte acrylic paint for decorating walls and ceilings, inside and outside, has great covering and filling capacity in order to leave the painted surface with a single layer using undiluted product or at most a 5%. Good performance and great leveling washable. White and bright colors.

More details

18,33€

tax incl.

24,44€ tax incl.

-25%

More info

DEFINITION

Pintudecor monolayer colors mate is a plastic paint consisting of high performance vinyl copolymers that provide extraordinary finishes due to its advanced formulation.

PROPERTIES

  • High covering leaving finishes in a single layer.
  • Washable.
  • Good leveling and high brochability.
  • It does not splash or drip.
  • Stable colors only indoors.

APPLICATIONS

Finished paint to protect, embellish and decorate interior walls and ceilings.

Performance: 8 to 10 m2 / l

HOW TO USE

  • Application conditions: Always remove the contents of the container until it is completely homogenized
  • Dilution: It is not necessary to dilute, although it is necessary to lower a maximum 5% for first and second hand
  • Application tools: Brush, roller or gun (in the latter case, use a mask)
  • Drying time: To the touch 30 minutes, dry from 4 to 6 hours according to room temperature. and the repainted 24 hours recommended
  • Cleaning of tools: With water, immediately after use and before they dry.
  • Preparation of the surface: The surface must be clean and dry. On surfaces contaminated with molds, fungi and algae, carefully wash the affected area preferably with specific cleaners (diluted biocides) using mechanical means (brushes, sponges, etc). Then wait 6 to 8 hours, wash the area thoroughly with water and once dry apply the paint. Old areas with poorly adhering layers of paint and efflorescence should be removed by brushing and deep scraping.
  • If the surface is very absorbent, apply a primer coat (water-based or solvent-based primer).
  • If the surface is previously painted and is in good condition, apply the product directly. We recommend a coat of PINTUDECOR MONOCAPA MATE COLORS, although depending on the intensity of the color of the support it may be necessary to apply 2 coats to ensure a perfect finish
Accept

We use own and third party cookies to improve services, obtain statistical information, display targeted advertising through analysis of your navigation as well as affiliate programs.