Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.
The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.
Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss finish. High adhesion. Hardwearing. Resistant to impact and scratches.
The use of Smooth OXIRON allows saving time because overcoating is possible after one hour and, in this way, most paint works can be finished in one single day.
Fields of Application
Indoors and outdoors. Very suitable for gratings, radiators, benches, electric appliances, doors.
Drying: 30 - 60 minutes
Recoat time: Minimum: 30 minutes. Maximum: 4 hours or after 5 days
Directions for use
The surfaces to be painted have to be dry and free from any dirt, grease, poorly adhered rust particles and low quality old paints.
It is important to keep the overcoating time if a high quality finish is required. Every following coat has to be applied by the next 4 hours. If this time is exceeded, wait 5 days. If this is overcoating requirement is not fulfilled, the applied surface may show creasing. In case of application by spray-gun, the following coats can be applied after 15 - 30 minutes.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:
Wash with soapy water, let to dry, lightly sand and directly apply Smooth OXIRON.
MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:
Thoroughly remove rust and poorly adhered previous coats by means of sandpaper or a metallic brush. For topcoats, proceed as for bare surfaces
DRYING: 30 - 60 minutes
APPLICATION METHODS:Brush, roller and spray-gun
Finish: Gloss
Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look.. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.
For indoor and outdoor use. For protecting and decorating all kinds of wood and metal.
Synthetic enamel. Based on high solids technology. Quick-drying. Multi-Purpose. Hard-wearing. Highly wash resistant. Fine velvety matt finish. Easy application. Very suitable for application by brush. For indoor use. To protect and embellish doors, furniture, vehicles, machinery, etc.
Anti-oxidant enamel with a smooth glossy finish that is applied directly on iron and oxide. With anticorrosive pigments of zinc, offering excellent protection against oxidation, adhesion and resistance to the elements.
Antioxidant enamel with smooth satin finish applied directly on iron and oxide. With anticorrosive zinc pigments, offering excellent protection against oxidation, adhesion and weather resistance.
Metallic paint with high solid content. Direct application, no primer is needed. High adhesion. High elasticity and weathering resistance. Excellent protection and decoration for any kind of iron surface to which it provides a natural metallic finish (bluing-like).
Synthetic enamel. Based on high solids technology. Specially for lacquering and enamelling. Easy application, producing premium quality, fine, soft-feel satin finishes with an excellent lacquered look.. Great resistance to wearing, scratching, soaps, liqueur, juice and oil stains. Highly wash-resistant.
For indoor and outdoor use. For protecting and decorating all kinds of wood and metal.
White satin synthetic glaze with fast drying and high color stability and high temperature resistance
Synthetic enamel to apply on non-ferrous metals (galvanized, zinc, aluminum, copper) without previous primer. Exceptional direct adhesion. Excellent weather resistance.
It is a coating based on a modified silicone resin and with pigments of a high thermal resistance. It stands high temperatures without losing its original appearance and protection performance. As a protection of iron and steel elements submitted to high temperatures. Suitable for boilers, chimneys and in general for all those elements that are continuously exposed to high temperatures up to 350ºC
It is a coating based on a modified silicone resin and with pigments of a high thermal resistance. It stands high temperatures without losing its original appearance and protection performance. As a protection of iron and steel elements submitted to high temperatures. Suitable for boilers, chimneys and in general for all those elements that are continuously exposed to high temperatures up to 350ºC
It is a synthetic, quick-drying enamel based on modified alkyd resins. Modified quick-drying synthetic enamel which contains a rust-preventive additive. To be directly applied on iron or steel. Excellent resistance to outdoor conditions.
Chat with us on WhatsApp
Español
Français
