TITANLUX SYNTHETIC ENAMEL GLOSS Indoors- Outdoors

Industrias Titan

New

Synthetic enamel. Based on high solids technology. Quick-drying. Multi-Purpose. High gloss. Elastic. Excellent colour and gloss stability. High resistance to scratching. Good levelling and edge coverage. Resistant to weathering, grease, washes, etc. All its colours are intermixable and the white colour has an extraordinary whiteness and resistance to yellowing

More details

6,25€

tax incl.

9,62€ tax incl.

-35%

More info

Description

Synthetic enamel. Based on high solids technology. Quick-drying. Multi-Purpose. High gloss. Elastic. Excellent colour and gloss stability. High resistance to scratching. Good levelling and edge coverage. Resistant to weathering, grease, washes, etc. All its colours are intermixable and the white colour has an extraordinary whiteness and resistance to yellowing.

Fields of Application

For indoor and outdoor use. To protect and embellish doors, furniture, industrial vehicles, machinery, etc.

Directions for use

  • GENERAL REMARKS:

Stir well before using. The surfaces to be painted have to be clean, dry and suitably primed. Remove all existing rests of dirt, grease, poorly adhered rust and previous coatings by using thinner or paint stripper, depending on requirements.

High-solids paints leave a thicker dry film. They should not be applied at thicknesses in excess of the data recommended in order to avoid problems of drying and surface appearance.

If the temperature of the surface is below 10ºC and if paint coat is thick, the overcoating time has to be longer. Check that the surface is suitably dry before overcoating.

  • BARE SURFACES:

    • Wood: Sand wood following the wood grain, thoroughly clean, remove all resins or resin secretion on the surface and smooth up sharp edges. Apply Primer usual sealant based on alkyd resins.
    • Iron and steel: Synthetic Rust-Preventive Primer. For outdoor surfaces, at least two coats of the selected primer will be needed. For indoor surfaces, one coat will be enough.
    • Other surfaces: Please consult your dealer.

In all cases for:

  • Indoor surfaces: Finish with 1 or 2 coats of TITANLUX Synthetic Enamel
  • Outdoor surfaces: Finish with 2 or 3 coats of TITANLUX Synthetic Enamel.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:

Wash, lightly sand and directly apply 1 or 2 coats of TITANLUX Synthetic Enamel.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:

Completely remove all previous paint coats and proceed as for bare surfaces.

Finish: Gloss

Coverage: 12 -14 m2/l

Drying: 4 - 5 hours

Recoat time: 18 - 24 hours

Methods of Application: Brush, roller and spray-gun

Equipment Cleaning: Odourless thinner

Download

Accept

We use own and third party cookies to improve services, obtain statistical information, display targeted advertising through analysis of your navigation as well as affiliate programs.