HAMMERED OXIRON. Indoors - Outdoors. Metallic. GLOSS

Industrias Titan

New

Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss hammered finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Hammered OXIRON allows to save time because overcoating is possible after one1 hour and, in this way, most paint works can be finished in one single day

More details

21,83€

tax incl.

33,58€ tax incl.

-35%

We shipping worldwide... Read more

Delivery in 24h

We have reinsurance program

Our shop is awarded for security

Volume discounts

QuantityPriceYou Save
2 tax incl. Up to 30,22€
2 tax incl. Up to 26,86€

More info

Description

Quick drying rustproof enamel-paint. Direct application on steel, no primer is needed. It provides up 10 years weathering resistance and a high gloss hammered finish. High adhesion. Hardwearing. Resistant to impact and scratches.

The use of Hammered OXIRON allows to save time because overcoating is possible after one1 hour and, in this way, most paint works can be finished in one single day.

Fields of Application

Indoors and outdoors. Very suitable for gratings, radiators, benches, electric appliances, doors.

Directions for use

  • GENERAL REMARKS:

Thoroughly stir the contents in the can before and while using. The surfaces to be painted have to be dry and free from any dirt, grease, poorly adhered rust particles and low quality old paints.

  • BARE SURFACES:
    • Steel or Iron: It can be directly applied. No primer needed. If the surface shows rust, lightly sand in order to roughen the surface. Remove poorly adhered rust. In environments with medium-high corrosion, steel has to be sanded up to ST-3 of the UNE EN ISO 8501-1 standard. Under these conditions, a minimum thickness of 140 microns (3 dry coats) will be required.
    • Zinc, tin, galvanized: surfaces: Sand to matt and apply ALL PRIMER 4X4
    • Wood: Primer usual sealant based on alkyd resins.
    • Other surfaces: Please seek advice.

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN GOOD CONDITION:

Wash with soapy water, let to dry, lightly sand and directly apply Wrought Finish Hammered OXIRON

MAINTENANCE OF PREVIOUSLY COATED SURFACES IN POOR CONDITION:

Thoroughly remove rust and poorly adhered previous coats by means of sandpaper or a metallic brush. For topcoats, proceed as for bare surfaces

Finish: Metallic. Gloss hammered.

Coverage: 8 - 12 m2/l (50 - 75 μ)

Drying:15 - 30 minutes

Recoat time:1 - 6 hours or after 7 days

Methods of Application: Brush, roller and spray-gun


Download

Accept

We use own and third party cookies to improve services, obtain statistical information, display targeted advertising through analysis of your navigation as well as affiliate programs.