FIX-TAC "Triple Action". PRINTING SYNTHETIC TIXOTROPIC multifunction ALP. Primer, sealant and anti-stain

Description

Synthetic thixotropic primer that combines three main characteristics in a single product: primer, sealant and anti-stain. To finish with a synthetic enamel or a plastic paint.

Main Properties

• Priming of common surfaces in construction.
• Great sealing ability of porous surfaces.
• Good staining capacity: smoke, nicotine, grease, etc.
• Excellent coverage and resistance to washing.
• Good brochability and leveling.
  

Recommended Uses

Indoors, for sealing and priming porous surfaces such as plaster, cement, plasters, wood, etc. And especially surfaces that present difficulties in their painting such as wet plasters, surfaces with saltpetre, stained with smoke, stains of dry moisture, grease, nicotine, etc. Recommended for kitchens, bathrooms, bars, country houses, museums, etc.

Surface treatment

Surfaces should always be healthy, clean, dry, free of dust and other contaminants.

• New porous surface (plaster, cement, wood). Remove grease stains by solvent cleaning and subsequent general painting according to the indicated dilutions.
• Surfaces already painted in poor condition: In addition to the above considerations, the surface must be free of poorly adhered paint. Sanitize defective areas and proceed as on a new surface.
  

Performance:

• As Sealant: 6-7 m2 / l
• As anti-stain: 10-12 m2 / l

Number of layers: 1 or 2 according to the absorption of the support.
Tools: Brush / Roller / Pistol.
Dilution: For brush or roller: Product ready to use. Dilute to a maximum of 5% with Synthetic Solvent
For spray gun dilute up to a maximum of 15% with Synthetic Solvent until adequate viscosity.
Cleaning: Clean utensils with Synthetic Solvent