Description:

Water dispersion adhesive especially for wall converings.

Applications:

Laying textile wallcoverings with paper supports, ligh or heacy vinyl paper, natural fibers,...etc, on plaster, concrete, wood and others.

Way of use:

The walls must be clean of dust,oil, fats. Aplly the adhesive by brush, roller or notched trowel, on one side, textile coatings on paper or fiberglass. In the case of wallpaper, apply the adhesive to the wall and the back of the paper. In very absorbent walls, applying a first adhesive layer diluted with water to 50%, to act as primer. After applying the adhesive, there is an open 15-25 minutes to proceed to their placement time. Once the coating is placed above, rub by brush or something like that, to remove any air pockets.

Instructions for use:

Adhesive ready to use, the maximum dilution that could admit is 10%.

Apply the adhesive by roller, brush or spatula, on one side in textile coatings with paper or fiberglass support.

When it comes to wallpaper, apply the adhesive to the wall and the back of the paper. In very absorbent walls, apply a first layer of 50% diluted adhesive in water to act as a primer and then apply the undiluted adhesive on the wall. The walls must be free of dust, grease, oils, etc ..., and be consistent.

Once the adhesive is applied, an open time of 15-25 minutes is available to proceed with its placement.

Once the coating is placed, a sufficient rubbing will be carried out by means of a brush or similar to eliminate possible air pockets

Performance: 200 - 300 g / m2

Cleaning:

• Wet: with water.
• Dry product: hot water or mechanical means.